Stress Deformation of Flexible Beams with Composite Reinforcement under Load

Authors

  • Ahmadaliyev Abdulxafiz Hasanboy o‘g‘li Assistant of Fergana Polytechnic Institute

DOI:

https://doi.org/10.31150/ajshr.v3i6.1219

Keywords:

stress, deformation, deformation state, strength and deformation indicators, elongation and compression reinforcement, deformation of concrete compression and elongation areas

Abstract

This article describes the work done to determine the deformations of composite reinforced flexible beams in concrete and reinforcement, measuring the slope of the beam, the location and width of cracks formed in the beam.

References

Davlyatov S. M., Makhsudov B. A. Technologies for producing high-strength gypsum from gypsum-containing wastes of sulfur production-flotation tailings //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 10. – С. 724-728.

Ахмедов Ж. Д. Оптимизация преднапряженных перекрестных ферменных систем //Промислове будівництво та інженерні споруди. К.: ВАТ “Укрдніпроектстальконструкція ім. ВМ Шимановського. – 2010. – Т. 4.

Akhrarovich A. K., Muradovich D. S. Calculation of cylindrical shells of tower type, reinforced along the generatrix by circular panels //European science review. – 2016. – №. 3-4. – С. 283-286.

Muratovich D. S. Study of functioning of reservoirs in the form of cylindrical shells //European science review. – 2016. – №. 9-10.

Adilhodzhaev A. et al. The study of the interaction of adhesive with the substrate surface in a new composite material based on modified gypsum and treated rice straw //European Journal of Molecular & Clinical Medicine. – 2020. – Т. 7. – №. 2. – С. 683-689.

Акрамов Х. А., Давлятов Ш. М., Хазраткулов У. У. Методы расчета общей устойчивости цилиндрических оболочек, подкрепленных в продольном направлении цилиндрическими панелями //Молодой ученый. – 2016. – №. 7-2. – С. 29-34.

Egamberdiyev B. O. et al. A Practical Method For Calculating Cylindrical Shells //The American Journal of Engineering and Technology. – 2020. – Т. 2. – №. 09. – С. 149-158.

Davlyatov S. M., Kimsanov B. I. U. Prospects For Application Of Non-Metal Composite Valves As Working Without Stress In Compressed Elements //The American Journal of Interdisciplinary Innovations Research. – 2021. – Т. 3. – №. 09. – С. 16-23.

Mirzaraximov M. A. O., Davlyatov S. M. APPLICATION OF FILLED LIQUID GLASS IN THE TECHNOLOGY OF OBTAINING A HEAT RESISTANT MATERIAL //Scientific progress. – 2021. – Т. 2. – №. 8. – С. 4-7.

Мамажонов А. У., Юнусалиев Э. М., Давлятов Ш. М. БЕТОН С МИНЕРАЛЬНЫМ НАПОЛНИТЕЛЕМ-ГЛИЕЖЕМ, ЭЛЕКТРОТЕРМОФОСФОРЫМ ШЛАКОМ И ДОБАВКОЙ АЦФ-3М //Энерго-ресурсосберегающие технологии и оборудование в дорожной и строительной отраслях. – 2020. – С. 220-226.

Абдуллаев И. Н. и др. СОВЕРШЕНСТВОВАНИЕ ТЕХНОЛОГИЧЕСКИХ МЕТОДОВ ПРИ УСТРОЙСТВЕ ФУНДАМЕНТОВ ГЛУБОКОГО ЗАЛОЖЕНИЯ //Scientific progress. – 2022. – Т. 3. – №. 1. – С. 526-532.

Гончарова Н. И., Абобакирова З. А. БИТУМИНИРОВАННЫЙ БЕТОН ДЛЯ ПОДЗЕМНЫХ КОНСТРУКЦИЙ ЗДАНИЙ //INTERNATIONAL CONFERENCES ON LEARNING AND TEACHING. – 2022. – Т. 1. – №. 6. – С. 122-125.

Абобакирова З. А., Бобофозилов О. ИСПОЛЗОВАНИЕ ШЛАКОВЫХ ВЯЖУЩИХ В КОНСТРУКЦИОННЫХ СОЛЕСТОЙКИХ БЕТОНАХ //INTERNATIONAL CONFERENCES ON LEARNING AND TEACHING. – 2022. – Т. 1. – №. 6.

Абобакирова З. А., кизи Мирзаева З. А. СЕЙСМИК ҲУДУДЛАРДА БИНОЛАРНИ ЭКСПЛУАТАЦИЯ ҚИЛИШНИНГ ЎЗИГА ХОС ХУСУСИЯТЛАРИ //INTERNATIONAL CONFERENCES ON LEARNING AND TEACHING. – 2022. – Т. 1. – №. 6. – С. 147-151.

Абобакирова З. А., угли Содиков С. С. СВОЙСТВА ЦЕМЕНТНОГО КАМНЯ ОПТИМАЛЬНОГО СОСТАВА С ДОБАВКАМИ В УСЛОВИЯХ СУХОГО ЖАРКОГО КЛИМАТА //INTERNATIONAL CONFERENCES ON LEARNING AND TEACHING. – 2022. – Т. 1. – №. 6. – С. 81-85.

Goncharova N. I., Abobakirova Z. A., Mukhamedzanov A. R. Capillary permeability of concrete in salt media in dry hot climate //AIP Conference Proceedings. – AIP Publishing LLC, 2020. – Т. 2281. – №. 1. – С. 020028.

Гончарова Н. И. и др. Применение Шлаковых Вяжущих В Конструкционных Солестойких Бетонах //Таълим ва Ривожланиш Таҳлили онлайн илмий журнали. – 2021. – Т. 1. – №. 6. – С. 32-35.

Ivanovna G. N., Asrorovna A. Z., Ravilovich M. A. The Choice of Configuration of Buildings When Designing in Seismic Areas //CENTRAL ASIAN JOURNAL OF ARTS AND DESIGN. – 2021. – Т. 2. – №. 11. – С. 32-39.

Гончарова Н. И., Абобакирова З. А., Мухаммедзиянов А. Р. Сейсмостойкость Малоэтажных Зданий Из Низкопрочных Материалов //CENTRAL ASIAN JOURNAL OF THEORETICAL & APPLIED SCIENCES. – 2021. – Т. 2. – №. 11. – С. 209-217.

Умаров Ш. А., Мирзабабаева С. М., Абобакирова З. А. Бетон Тўсинларда Шиша Толали Арматураларни Қўллаш Орқали Мустаҳкамлик Ва Бузилиш Ҳолатлари Аниқлаш //Таълим ва Ривожланиш Таҳлили онлайн илмий журнали. – 2021. – Т. 1. – №. 6. – С. 56-59.

Мамажонов А. У., Юнусалиев Э. М., Абобакирова З. А. Об опыте применения добавки ацф-3м при производстве сборных железобетонных изделий //Энерго-ресурсосберегающие технологии и оборудование в дорожной и строительной отраслях. – 2020. – С. 216-220.

Мирзаахмедова У. А. и др. Надежности И Долговечности Энергоэффективные Строительные Конструкций //Таълим ва Ривожланиш Таҳлили онлайн илмий журнали. – 2021. – Т. 1. – №. 6. – С. 48-51.

Кодиров, Г. М., Набиев, М. Н., & Умаров, Ш. А. (2021). Микроклимат В Помещениях Общественных Зданиях. Таълим ва Ривожланиш Таҳлили онлайн илмий журнали, 1(6), 36-39.

Umarov, S. A. (2021). Development of deformations in the reinforcement of beams with composite reinforcement. Asian Journal of Multidimensional Research, 10(9), 511-517.

Akhrarovich, A. X., Mamajonovich, M. Y., & Abdugofurovich, U. S. (2021). Development Of Deformations In The Reinforcement Of Beams With Composite Reinforcement. The American Journal Of Applied Sciences, 3(05), 196-202.

Гончарова Н. И., Абобакирова З. А., Мухамедзянов А. Р. Энергосбережение в технологии ограждающих конструкций //Энерго-ресурсосберегающие технологии и оборудование в дорожной и строительной отраслях. – 2020. – С. 107-112.

Гончарова Н. И. и др. Разработка солестойкого бетона для конструкций с большим модулем открытой поверхности //Молодой ученый. – 2016. – №. 7-2. – С. 53-57.

Abobakirova Z. A. Reasonable design of cement compositionfor refactory concrete //Asian Journal of Multidimensional Research. – 2021. – Т. 10. – №. 9. – С. 556-563.

Goncharova N. I., Abobakirova Z. A. Reception mixed knitting with microadditive and gelpolimer the additive //Scientific-technical journal. – 2021. – Т. 4. – №. 2. – С. 87-91.

Goncharova N. I., Abоbakirova Z. A., Kimsanov Z. Technological Features of Magnetic Activation of Cement Paste" Advanced Research in Science //Engineering and Technology. – 2019. – Т. 6. – №. 5. – С. 12.

Goncharova N. I., Abobakirova Z. A., Mukhamedzanov A. R. Capillary permeability of concrete in salt media in dry hot climate //AIP Conference Proceedings. – AIP Publishing LLC, 2020. – Т. 2281. – №. 1. – С. 020028.

Asrorovna A. Z. Effects Of A Dry Hot Climate And Salt Aggression On The Permeability Of Concrete //The American Journal of Engineering and Technology. – 2021. – Т. 3. – №. 06. – С. 6-10.

Abobakirova Z. A. Regulation Of The Resistance Of Cement Concrete With Polymer Additive And Activated Liquid Medium //The American Journal of Applied sciences. – 2021. – Т. 3. – №. 04. – С. 172-177.

Мирзажонович Қ. Ғ., Мирзабабаева С. М. БИНОЛАРНИ ЎРОВЧИ КОНСТРУКЦИЯЛАРИНИ ТУЗЛАР ТАЪСИРИДАГИ СОРБЦИОН ХУСУСИЯТИНИ ЯХШИЛАШ //RESEARCH AND EDUCATION. – 2022. – С. 86.

Мирзабабаева С. М., Мирзажонович Қ. Ғ. БЕТОН ВА ТЕМИРБЕТОН КОНСТРУКЦИЯЛАР БУЗИЛИШИНИНГ ТУРЛАРИ ВА УЛАРНИНГ ОЛДИНИ ОЛИШ //RESEARCH AND EDUCATION. – 2022. – С. 91.

Abdukhalimjohnovna M. U. Failure Mechanism Of Bending Reinforced Concrete Elements Under The Action Of Transverse Forces //The American Journal of Applied sciences. – 2020. – Т. 2. – №. 12. – С. 36-43.

Abdukhalimjohnovna M. U. Technology Of Elimination Damage And Deformation In Construction Structures //The American Journal of Applied sciences. – 2021. – Т. 3. – №. 05. – С. 224-228.

Akhrarovich A. X., Mamajonovich M. Y., Abdugofurovich U. S. Development Of Deformations In The Reinforcement Of Beams With Composite Reinforcement //The American Journal of Applied sciences. – 2021. – Т. 3. – №. 5. – С. 196-202

Акрамов, Х. А. "Прочность, жесткость и трещиностойкость изгибаемых железобетонных трехслойных конструкцій." PhD diss., ступеня д-ра. техн. наук/ХА Акрамов.–Ташкент: ТАСИ, 2002.–38 c, 2002.

Akhrarovich A. X., Mamajonovich M. Y., Abdugofurovich U. S. Development Of Deformations In The Reinforcement Of Beams With Composite Reinforcement //The American Journal of Applied sciences. – 2021. – Т. 3. – №. 5. – С. 196-202.

Egamberdiyev, B. O. "A Practical Method For Calculating Cylindrical Shells." The American Journal of Engineering and Technology 2.09 (2020): 149-158.

Egamberdiyev B. O. et al. A Practical Method For Calculating Cylindrical Shells //The American Journal of Engineering and Technology. – 2020. – Т. 2. – №. 09. – С. 149-158.

Makhkamov Y. M., Mirzababaeva S. M. RIGIDITY OF BENT REINFORCED CONCRETE ELEMENTS UNDER THE ACTION OF SHEAR FORCES AND HIGH TEMPERATURES //Scientific-technical journal. – 2021. – Т. 4. – №. 3. – С. 93-97.

Махкамов Й. М., Мирзабабаева С. М. Прогибы изгибаемых железобетонных элементов при действии поперечных сил и технологических температур //Проблемы современной науки и образования. – 2019. – №. 12-2 (145).

Downloads

Published

2022-06-18

How to Cite

o‘g‘li, A. A. H. . (2022). Stress Deformation of Flexible Beams with Composite Reinforcement under Load. American Journal of Social and Humanitarian Research, 3(6), 247–254. https://doi.org/10.31150/ajshr.v3i6.1219